LARGE FEED. FRONT ACCESS.
BB 400
Large feed with a fine result
- Feed size*
- < 220 × 90 mm
- Final fineness*
- < 2 mm
- Throughput*
- 400 kg/h
03 / HIGHER-CAPACITY & PROCESS LINES / JAW CRUSHERS
More material.
A purposeful reduction.
Compare BB 400, BB 500 and BB 600 for higher-capacity preparation, small-scale production and process-line integration. Choose between larger feed, finer output and maximum throughput.
CHOOSE YOUR STARTING POINT
Compare the production scale range.
BB 400, BB 500 and BB 600 for larger workflows and line integration.
POWER & FINAL FINENESS
BB 500
Finer output in one working run
- Feed size*
- < 110 mm
- Final fineness*
- 90% < 0.5 mm
- Throughput*
- 500 kg/h
MAXIMUM FEED & THROUGHPUT
BB 600
Largest feed and highest throughput
- Feed size*
- < 350 × 170 mm
- Final fineness*
- < 6 mm
- Throughput*
- 3,500 kg/h
Feed size, final fineness and throughput depend on the material, jaw selection, gap setting and configuration. Published capacities are not simultaneous performance guarantees. Scale labels describe browsing groups rather than exclusive operating limits.
SIDE BY SIDE
Different models.
Different priorities.
| Model | Feed size* | Final fineness* | Capacity / throughput* | Collector | Gap setting |
|---|---|---|---|---|---|
| BB 400 ↗ | < 220 × 90 mm | < 2 mm | 400 kg/h | 10 L | 0 – 30 mm |
| BB 500 ↗ | < 110 mm | 90% < 0.5 mm | 500 kg/h | 15 L | 0 – 11 mm |
| BB 600 ↗ | < 350 × 170 mm | < 6 mm | 3,500 kg/h | 30 L | 6 – 60 mm with spacer plates |
*Feed size, final fineness and throughput depend on the material, jaw selection, gap setting and configuration. Published capacities are not simultaneous performance guarantees. BB 50 capacity is stated per batch; other throughput figures are published hourly maxima.
GUIDE THE SELECTION
Develop the right crushing route.
Larger feed with fine output
BB 400 combines feed below 220 × 90 mm with final fineness below 2 mm and published throughput up to 400 kg/h.
Emphasize final fineness
BB 500 accepts feed below 110 mm and offers a published result of 90% below 0.5 mm, with throughput up to 500 kg/h.
Emphasize capacity
BB 600 accepts feed below 350 × 170 mm with throughput up to 3,500 kg/h and final fineness below 6 mm. Review the full installation.
SELECT A MODEL. PROVE THE RESULT.
Your feed.
Your next decision.
Share the starting size, target result, material and required capacity. Discuss feasibility testing, jaw materials and a configuration suited to the workflow.
EXPLORE THE OTHER SCALES
