Shop
Showing 97–120 of 122 results
-
Mixing & Degassing, Planetary Centrifugal Mixers
SK-1100T Planetary Centrifugal Mixer
Model equipped for both high speed revolution and a wide radius gyration, supporting for the production of high quality materials.
The timing by which the revolving speed of rotation increases is controlled to improve the mixing rate of powders and liquids and sustains the generation of lumps.1100ml × 2 cups
SKU: n/a -
Mixing & Degassing, Planetary Centrifugal Mixers
SK-1100TVII / SK-1100TVSII Planetary Centrifugal Mixer with Vacuum
Mixing & Degassing, Planetary Centrifugal MixersSK-1100TVII / SK-1100TVSII Planetary Centrifugal Mixer with Vacuum
A model with a vacuum reduced pressure function suited for medium-scale production.
The individual revolution and rotation speed control system and wide radius gyration generate centrifugal force even at low revolving speeds, sustaining material of thermal elevation and composition change.1100ml × 2 cups
SKU: n/a -
Mixing & Degassing, Planetary Centrifugal Mixers
SK-2000T Planetary Centrifugal Mixer
Features
- Maximum processing amount２kg × ２ cups
- An order-made mixer compatible with the containers the client currently uses.
- Maximum compatible container size: 150 mm diameter x 170 mm height
- Multiple containers can be loaded by using an adopter, and loss of material is reduced by selecting containers according to the production amount.
- It enables to have certain throughput without adopters.
2000ml × 2 cups (2kg)
SKU: n/a -
Mixing & Degassing, Planetary Centrifugal Mixers
SK-300SVII Planetary Centrifugal Mixer with Vacuum
A compact, vacuum function, 1-cup, reasonable model with a simple mechanism.
With low revolving speed of 400G centrifugal force, it enables to control thermal elevation of materials.300ml × 1 cup
SKU: n/a -
Mixing & Degassing, Planetary Centrifugal Mixers
SK-300TVSII 600ml Planetary Centrifugal Mixer with Vacuum
Mixing & Degassing, Planetary Centrifugal MixersSK-300TVSII 600ml Planetary Centrifugal Mixer with Vacuum
A high function model with a vacuum reduced pressure function.
The individual revolution and rotation speed control system and the shifted cup tray enhance mixing performance and provide effective degassing.300ml × 2 cups
SKU: n/a -
Mixing & Degassing, Planetary Centrifugal Mixers
SK-350TII Planetary Centrifugal Mixer
90 different revolution-rotation speed patterns are available by varying the ratio of revolution and rotation.
A high function model for covering from research and development to small-scale production.400 ml × 2 cups Compatible with various types of syringe
SKU: n/a -
Mixing & Degassing, Planetary Centrifugal Mixers
SK-350TV / SK-350TVS Planetary Centrifugal Mixer with Vacuum
Mixing & Degassing, Planetary Centrifugal MixersSK-350TV / SK-350TVS Planetary Centrifugal Mixer with Vacuum
Greatly improved mixing performance with the same features as existing models!
A new advanced function model equipped with the individual revolution and rotation speed control system!!400ml × 2 cups
SKU: n/a -
Planetary Centrifugal Mixers
SK-4000T/TV Planetary Centrifugal Mixer
Model equipped for both high speed revolution and a wide radius gyration, supporting for the production of high quality materials.
The timing by which the revolving speed of rotation increases is controlled to improve the mixing rate of powders and liquids and sustains the generation of lumps.2 cups x 4 Liters
SKU: n/a -
Mixing & Degassing, Planetary Centrifugal Mixers
SK-BS12 Long Barrel Cartridge Series Planetary Centrifugal Mixer
Mixing & Degassing, Planetary Centrifugal MixersSK-BS12 Long Barrel Cartridge Series Planetary Centrifugal Mixer
A planetary centrifugal mixer specifically for long barrel cartridges, on which 12 oz (360 ml) and 6 oz (180 ml) cartridge can be set.
- The individual revolution and rotation speed control system achieves uniform mixing of materials in short amounts of time and elimination of ultrafine air bubbles.
- Productivity and operability can be improved by using cartridges with sizes suited for the amount to be produced (12 or 6 oz).
* An exclusive adopter (spacer) is required to use 6 oz cartridges.
SKU: SK-BS12 -
Mixing & Degassing, Planetary Centrifugal Mixers
SK-MP12 Planetary Centrifugal Mixer for Microplate
Uniform mixing of samples in the microplate and ultrafine air bubble elimination with high speed processing.
This contributes to improved measurement result reliability.- Multiple microplates can be set, so uniform mixing and ultrafine air bubble elimination can be performed simultaneously in a short amount of time.
- By using an exclusive adopter, mixing and degassing are possible with 18 or 96 well microplates, as well as 384 and 1536 well microplates as full range.
- Mixing and degassing of micro tubes and culture tubes are also possible by having an adopter (as an option).
- Total 12 PCR plates or microplates can be handled simultaneously.
Click here for information video.
SKU: n/a -
Cutting Mills, Grinding & Milling
SM 100 Cutting Mill
Cutting mills are suitable for the grinding of soft, medium-hard, elastic, fibrous, and heterogeneous mixes of products.
The SM 100 is the budget-priced basic model among the cutting mills. With its strong 1.5 kW drive and 1,500 rpm rotor speed the mill is particularly suitable for routine applications. Cleaning is made particularly easy.
In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements. The SM 100 can be bench-mounted; alternatively a convenient base frame on wheels is available.
SKU: n/a -
Cutting Mills, Grinding & Milling
SM 200 Cutting Mill
Cutting mills are suitable for the grinding of soft, medium-hard, elastic, fibrous, and heterogeneous mixes of products. The new cutting mill SM 200 is a powerful and easy-to-operate instrument for efficient primary and fine size reduction. Cleaning is made particularly easy.
Within the group of the cutting mills, it is the universal standard model which covers a vast range of applications with its strong 2.2 kW drive and 1,500 rpm rotor speed. When operated with the optional cyclone-suction-combination, the SM 200 is also suitable for grinding light sample materials or smaller quantities. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.
SKU: n/a -
Cutting Mills, Grinding & Milling
SM 300 Cutting Mill
Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The new Cutting Mill SM 300 excels especially in the tough jobs where other cutting mills fail.
The high torque of the new 3 kW drive with RES technology (additional flywheel mass) allows for an exceptionally effective preliminary size reduction of heterogeneous mixtures, such as waste or electronic components. Analytical fineness is often achieved in one working run.
The cutting mill is used successfully for a great variety of materials. The sample is only moderately warmed up during the grinding process so that the mill is perfectly suitable for grinding temperature-sensitive materials. Another innovation is the wide, freely selectable speed range from 100 to 3,000 min-1.
When operated with the optional cyclone-suction-combination, the SM 300 is also suitable for grinding light sample materials or smaller quantities. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.
SKU: n/a -
Cutting Mills, Grinding & Milling
SM 400 Cutting Mill
Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The Cutting Mill SM 400 is ideally suited for pre-cutting of large sample pieces but, depending on the application, may also achieve the required fineness in one step.
The high torque of the new 3 kW drive allows for an exceptionally effective preliminary size reduction of heterogeneous mixtures, such as waste or electronic components.
The cutting mill is used successfully for a great variety of materials. The sample is only moderately warmed up during the grinding process so that the mill is perfectly suitable for grinding temperature-sensitive materials. Due to the large open surface of the 240 mm x 240 mm bottom sieve, it is possible to grind large sample quantities and to increase the throughput.
When operated with the optional cyclone-suction-combination, the SM 400 is also suitable for grinding light sample materials. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.
SKU: n/a -
Grinding & Milling, Rotor Mills
SR 300 Rotor Beater Mill
The Rotor Beater Mill SR 300 is suitable for coarse and fine size reduction, either in batches or continuously. It can process dry, soft, medium-hard, organic and inorganic substances.
With its adjustable speed of 3,000 to 10,000 rpm the rotor beater mill SR 300 is intended for universal use: from sample preparation in laboratories up to preparing sample batches in pilot plants or production facilities. The grinding chamber, the feed hopper and the material inlet are completely made from high quality stainless steel.
SKU: n/a -
Grinding Media
Steel (sp.gr. 7.8)
Various alloys available (low carbon, high carbon, chrome steel, stainless steel, etc.) in a variety of forms:
Ball bearings Good wear, very round but will result in metallic contamination. Cost directly related to material and inversely proportional to size. 1/16″ to 6″.
Shot Irregular shapes with lumps and bumps, but only cost effective alternative for steel in sizes less than 1mm. Inexpensive, sizes from 90 microns to 3mm.
Other forms Steel wire can be cut and formed to produce diagonals, ballcones (looks like a flattened ice cream cone), pins (rods), oval balls and other shapes.
Please contact us for up to date pricing.
SKU: n/a -
Ultrasonic Liquid Processing
Synetube Sonitube
The ultrasonic homogenization equipment developed by SYNETUDE generates a high shear power, allowing the elimination of agglomerates and the dispersion of powders, nanopowders, proteins… Designed to meet current pharmaceutical standards, our technologies combine quality, ease of use, reliability and reduced maintenance. They are widely used in the production of human and animal vaccines.
Meeting the highest standards
Flow: mL/second to m3/hour
High efficiency and low energy consumption
Aseptic Design: GMP, cGMP and FDA
ONLINE cleaning and sterilization NEP – MSSKU: n/a -
Assisting, Fluid Bed Dryers
TG 200 Fluid Bed Dryer
The fluid bed dryer TG 200 is used in quality control, sample preparation and R&D departments. It permits the gentle drying of organic, inorganic, chemical or pharmaceutical bulk materials without localized overheating. Suitable materials can be coarse, fine, crystalline, fibrous or leafy. The powerful fan of the fluid bed dryer ensures optimal air throughput so that the products to be dried are loosened up and thoroughly mixed resulting in short drying times. With the interval operation the fluidized bed is mixed even better. Temperature, drying time and air volume can be set digitally and adjusted continuously.
SKU: n/a -
Tissue Tearor
Tissue Tearor
The Tissue-Tearor is a rotor/stator type tissue homogenizer which can rapidly homogenize, disrupt, and emulsify samples in 0.5 – 1000 ml of liquid. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in ten to thirty seconds. Little, if any, heat is produced during the process.
If you need a 230 volt unit, please select models that end in EUR. When ordering select one of our four different probe sizes – 04, 07, XL, and 14. Unlike most competitive Brands of rotor-stator homogenizer, THE TISSUE-TEAROR COMES COMPLETE WITH BOTH THE HIGH-SPEED MOTOR AND ONE STAINLESS STEEL PROBE OF YOUR CHOICE. See chart below for probe selection guidance. Additional probes are available. All are interchangeable with the TT motor unit. A cord-less variety of the TissueTearor is also available with model numbers ending in CL.
SKU: n/a -
Drum Mills, Grinding & Milling
TM 300 Drum Mill
The TM 300 Drum Mill is used for the preparation of granules and powders. The grinding process is performed either in dry or wet conditions. The drum mill can be operated either as a Ball or as a Rod Mill by using the corresponding module. A sufficient number of balls or rods is required for an effective grinding process. Typically, a final fineness below 20 microns is obtained.
The drum mill consists of a gear motor mounted on a solid steel frame complete with outlet funnel and a set of separation screens plus sample collector. The TM 300 features a yoke and locking mechanism for easy access to the sample. The drum cover is easily removed for cleaning thanks to a quick release locking mechanism.
Adjustment of grinding parameters:
Parameters like grinding time or start and stop are set conveniently via the display. The following factors have an influence on the final particle size: Sample characteristics, maximum feed size and capacity. We will gladly support you in working out the most suitable configuration for your specific application.SKU: n/a -
-
Grinding & Milling, Rotor Mills
TWISTER Cyclone Mill
The cyclone mill TWISTER is specially designed for the processing of foods and feeds for subsequent NIR analysis. The optimized form of rotor and grinding chamber generates an air jet which carries the ground sample through the integrated cyclone into the sample bottle. The air jet prevents the material from heating up, thus preserving the moisture content.
The provided sieves guarantee an optimum particle size distribution so that it is not necessary to recalibrate the NIR spectrometer. The rotor speed can be adjusted in 3 steps allowing for perfect adaptation to the sample requirements. Cleaning the mill is quick and easy as the air jet effects a complete discharge of the material from the grinding chamber.
This new cyclone mill in proven quality optimizes the reproducible sample preparation to NIR analysis thus allowing for meaningful and reliable analysis results.
SKU: n/a -
Assisting, Ultrasonic Baths
UR Ultrasonic Baths
The ultrasonic bath range UR includes three sizes for cleaning test sieves and grinding tools quickly and easily. UR 1 is for test sieves up to 203 mm dia., UR 2 for test sieves up to 450 mm dia., and the UR 3 for the simultaneous cleaning of up to 5 test sieves 200/203 mm dia. The gentle yet thorough cleaning of test sieves in an ultrasonic bath increases their working lives as damage which could occur during manual cleaning is avoided.
SKU: n/a -
Grinding & Milling, XRD-Mill McCrone
XRD-Mill McCrone
The XRD-Mill McCrone was specially developed for the preparation of samples for subsequent X-ray diffraction (XRD). The mill is used for applications in geology, chemistry, mineralogy and materials science, quality control as well as R&D.
Because of its unique grinding motion, the XRD-Mill McCrone is particularly effective for this analytical method: The 48 cylindrical grinding elements grind the samples gently via friction. The result is a short grinding time with almost no sample loss and an exceptionally narrow particle size distribution.
The crystal lattice is almost entirely preserved during grinding operation, a premise for meaningful X-ray diffraction.The grinding vessel consists of a 125 ml capacity polypropylene jar fitted with a screw capped gasketless polyethylene closure. The jar is filled with an ordered array of 48 identical cylindrical grinding elements, available in agate, zirconium oxide or corundum. The grinding time for optimum micronization is between 3 and 30 minutes. A typical sample volume is between 2 and 4 ml.
SKU: n/a
