Shop
Showing 25–48 of 122 results
-
Grinding & Milling, Jaw Crushers
BB 500 Jaw Crusher
The Jaw Crusher BB 500 is used for rapid, effective, crushing and pre-crushing of medium-hard, hard, brittle and tough materials. Its variety of materials offered, including heavy-metal free steel, and its efficiency and safety makes the BB 500 ideal for sample preparation in laboratories and industrial plants.
For small amounts of sample the BB 500 is used batch-wise; for larger amounts it can be operated continuously. Control of the gap width and zero-point adjustment allow for reproducible results.
The BB 500 with its steep crushing chamber and powerful drive provides for very effective crushing kinematics.
SKU: n/a -
Grinding & Milling, Jaw Crushers
BB 600 Jaw Crusher
The Jaw Crusher BB 600 is used for rapid, effective, crushing and pre-crushing of medium-hard, hard, brittle and tough materials.
Due to the low installation height (1 m), the BB 600 is ideally suited for continuous operation in automatic installations and sampling stations. Thanks to the compact design of the BB 600 it may replace a jaw crusher in existing installations.
Small sample amounts with large particle sizes can be crushed batch-wise in the Jaw Crusher BB 600.
SKU: n/a -
BeadBeater
BeadBeater
The BeadBeater disrupts microorganisms, single-cell preparations and pulverized plant and animal tissue with better than 95 percent efficiency. Up to 80 grams (wet weight) of cells can be processed in a typical three minute run. Relying on a unique crushing or cracking action rather than high shear forces found with a French Press or sonicator, a Teflon impeller rotating at high speed forces thousands of minute glass beads to violently collide in a special clover-leaf shaped vessel. Cells are disrupted quickly, efficiently and safely in the sealed system. The apparatus is easy to clean, has a small footprint, requires no auxiliary supplies or equipment and is essentially maintenance free. Beads settle out in seconds and are reusable. The apparatus is easy to clean, has a small footprint, requires no auxiliary supplies or equipment and is essentially maintenance free. Beads settle out in seconds and are reusable.
The BeadBeater comes complete with a 350 ml polycarbonate chamber, rotor assembly, motor base, ice-water cooling jacket and one pound of glass beads of your choice.
- Ideal for isolating proteins, enzymes and intact intracellular organelles
- Powerful 3/8 HP motor. Only durable, non-toxic components contact product
- Designed for batches up to 80g (wet wt.) in 200 ml of medium
- Highly efficient disruption in shortest times possible
- Sample cooling during homogenization is simple and efficient
Controlling Heat
Like many mechanical cell disruption techniques, the Beadbeating process generates heat. In general for every minute of beadbeating there is a 10 deg rise in sample temperature. Should that be a problem, the ice-water jacket included with the BeadBeater helps keep this temperature increase under control. If you require even more temperature control, stainless steel or aluminum sample chambers are offered (see accessories).
SKU: n/a -
Grinding Media
Ceramics, includes Aluminum Oxide and Zirconium Oxide (sp.gr. 3.5 to 6.1)
Alumina Grinding Media (sp.gr. 2.8 to 3.9)
Available in a range of specific gravities which rises as the alumina (Al2O3) content increases. The grinding media is actually alumina particles held in place by an SiO2 glass phase. Sizes from 400 microns to over 1 inch in beads, balls, satellites (ball with bands) and cylinders. Low to medium cost, small sizes are more costly.
Fused Zirconium oxide Grinding Media (sp.gr. 3.8) Smooth surface leads to low mill wear and longevity. Sizes from 200 microns to 2.5mm. Medium cost.
Sintered Zirconium silicate Grinding Media (sp.gr. 4.0-4.6) ZrO2 + SiO2 + Al2O3, with and without Y2O3 stabilizer. Tight size spreads from 200 microns to 2.6mm. Low to medium cost.
High density Zirconium oxide Grinding Media (sp.gr. 5.5) 95% ZrO2 + MgO stabilizer. Beads from 400 microns to 3.35mm. Cylinders and satellites to 1-1/4″. Medium cost.
Rare Earth stabilized Zirconium oxide Grinding Media (sp.gr. 5.8 to 6.1) ZrO2 + CeO. Yellow or black, very hard. Sizes from 400 microns to 2″. Medium cost.
Yttrium stabilized Zirconium oxide Grinding Media (sp.gr. 6.0) 95% ZrO2 + 5% Y2O3. Best wear properties of all grinding media, very round and very smooth, narrow size spreads. High cost is offset by low wear and minimal contamination.
Please contact us for up to date pricing.
SKU: n/a -
Cryogenic Milling, Grinding & Milling
CryoMill
The CryoMill is tailored for cryogenic grinding. The grinding jar is continually cooled with liquid nitrogen from the integrated cooling system before and during the grinding process. Thus the sample is embrittled and volatile components are preserved. The liquid nitrogen circulates through the system and is continually replenished from an Autofill system in the exact amount which is required to keep the temperature at -196 °C.
Powerful impact ball milling results in a perfect grinding efficiency. The Autofill system avoids direct contact with LN2 and makes cryogenic grinding very safe. Its versatility (cryogenic, wet and dry grinding at room temperature) makes the CryoMill the ideal grinder for quantities up to 20 ml.You may also be interested in the High Energy Ball Mill Emax, an entirely new type of mill for high energy input. The unique combination of high friction and impact results in extremely fine particles within the shortest amount of time.
SKU: n/a -
Disc Mills, Grinding & Milling
DM 200 Disc Mill
Thanks to its robust design, the Disc Mill DM 200 can be used under rough conditions in laboratories and pilot plants, as well as online for the quality control of raw materials. The powerful DM 200 requires only a few minutes to achieve the desired grind size.
SKU: n/a -
Disc Mills, Grinding & Milling
DM 400 Disc Mill
The DM 400 is the new comfort model for fine grinding of medium-hard, hard and brittle materials down to 0.05 mm. This model is based on the well-proven DM 200 but offers improved safety features due to the automatic locking of the collecting vessel and grinding chamber, as well as particularly convenient operation thanks to the motor-driven grinding gap adjustment with digital gap display. The clearly structured display shows all grinding parameters.
Thanks to its robust design, the Disc Mill DM 400 can be used under rough conditions in laboratories and pilot plants, as well as online for the quality control of raw materials. The powerful DM 400 requires only a few minutes to achieve the desired grind size.
SKU: n/a -
Assisting, Vibratory Feeders
DR 100 Vibratory Feeder
The vibratory feeder DR 100 is used for the uniform, continuous feeding and conveyance of pourable bulk materials and fine powders. The DR 100 feeds mills, sample dividers, and particle measuring devices, and it is also suitable for other feeding tasks. Its performance, adaptability and compact design makes this device suitable for a great variety of applications. The DR 100 can also be driven and controlled externally via the built-in interface. Vibratory feeders guarantee reproducibly exact results and maximize the efficiency of downstream laboratory and testing devices.
SKU: n/a -
-
Rotary Evaporators
Eyela N-2100 Series Rotary Evaporator
Features
■ Desktop type evaporator to accept 2L or 5L flask. Motorized auto jack ensures smooth up/down movement.
■ Main unit is common to all models.
■ N-21 DOR: 2L reflux type condenser which is suitable for refining/reaction of condensed solvents.
■ N-21 DOU: 2L lower part cooling type condenser which is suitable for samples easy to bump or disperse.
■ N-2100: 5L type condenser.
■ RF·UF·F: Eyela glass coating type
■ Setting of rotation speed and temperature can be done by control panel attached to base of main unit. Even when the unit is placed inside fume hood.minimum open space is required for setting.
■ By using joint adapter and vacuum seal (option), Ts 29/38 sample flask can be used.SKU: n/a -
French Press
French Press G-M® High Pressure Cell Disruption
The French pressure cell press, or French press, is an apparatus used in biological experimentation to disrupt the plasma membrane of cells by passing them through a narrow valve under high pressure.
The French Press can also be used for disintegration of chloroplasts, homogenates of animal tissue, and other biological particles. It is capable of disrupting cell walls while leaving the cell nucleus undisturbed. The press uses an external hydraulic pump to drive a piston within a larger cylinder that contains the liquid sample. The highly pressurized sample is then squeezed past a needle valve. As the sample passes through the valve, the fluid experiences shear stress and decompression, causing cellular disruption.
A French press is commonly used to break the resilient plasma membrane and cell walls of bacteria and other microorganisms for isolation of proteins and other cellular components. The disruption of cells in a French press generates ‘inside-out’ membrane vesicles which are required for many in vitro biochemical assays.
SKU: n/a -
Grinding Media
Glass (sp.gr. 2.2 to 3.0)
The first of the “engineered” class of grinding media, glass beads (small balls) and balls were developed specifically for grinding applications where sand wasn’t available. Glass is manufactured in various grades (Lead-free Soda Lime, borosilicate, low alkali, black glass, and others) in sizes from 1 micron to 2 inches.
Good wear properties coupled with reasonable roundness means this is the best material to start with when conducting grinding trials. Low cost.
Glass balls are also available in precision grades and are used in optical resolution systems and as “spacers” for precision electronics. Colored glass balls are used for both engineering and decorative applications.
Please contact us for up to date pricing.
SKU: n/a -
-
Disc Mills, Grinding & Milling
GM#43 Disc Mill
- Outstanding particle size spreads feature high extraction rates and the best possible taste
- Premium cast steel burrs
- Robust grinder with high grinding capacity
- Suitable for different applications: filter, espresso, or turkish fine coffee grinding
- Grinding of other grists such as spices, grain, poppy-seed and linseed is possible with individual burrs
- Easy and precise grind adjustment
SKU: n/a -
Grinding & Milling, Knife Mills
Grindomix GM 200 Knife Mill
The knife mill GRINDOMIX GM 200 is the ideal instrument for grinding and homogenizing foods and feeds. It allows to process sample volumes up to 0.7 liters quickly and reproducibly.
With two sharp, robust blades and a powerful 1000 W motor, it is ideal for homogenizing substances with a high water, oil or fat content as well as for grinding dry, soft and medium-hard products. A wide selection of lids and containers allows for adaptation of the mill to individual application requirements. The GRINDOMIX GM 200 meets and exceeds all special laboratory and analytical requirements and is a professional device superior to any commercial household mixer.
SKU: n/a -
Grinding & Milling, Knife Mills
Grindomix GM 300 Knife Mill
The knife mill GRINDOMIX GM 300 is the ideal instrument for grinding and homogenizing foods and feeds. It allows to process sample volumes up to 0.7 liters quickly and reproducibly.
With four sharp, robust blades and a powerful 1000 W motor, it is ideal for homogenizing substances with a high water, oil or fat content as well as for grinding dry, soft and medium-hard products. A wide selection of lids and containers allows for adaptation of the mill to individual application requirements. The GRINDOMIX GM 300 meets and exceeds all special laboratory and analytical requirements and is a professional device superior to any commercial household mixer.
SKU: n/a -
Hammer Mills
HM 200 Hammer Mill
Hammer mills are used for crushing, pulverizing and deagglomeration of medium-hard, hard, brittle, tough and fibrous samples.
The rugged RETSCH Hammer Mill HM 200 accepts large feed sizes up to 100 mm which can be reduced to less than 0.8 mm, depending on the sample properties.
The mill is ideally suited for processing large volumes batchwise or continuously which ensures high sample throughput. Thanks to features like rugged design, easy handling and quick cleaning, the HM 200 is equally suitable for use in laboratories or pilot plants.
SKU: n/a -
Cell Culture
Implant Blanks
Zellwerk GmbH supplies customized implant blanks from Sponceram® and other materials for research use. Blanks for medical use are in preparation. Implant blanks are easily colonized in our Z® RP Bioreactor equipped with implant-specific holding fixtures. E. g. is a moulded carrier of Sponceram® HA covered by primary chondrocytes embedded in their own collagen matrix. Under appropriate cultivation conditions these chondrocytes express Collagene II and Glucosamine Glucanes in physiological ratios indicating in vivo-like differentiation. Implant blanks made from Sponceram® are ideally suited to generate bone-like structures after colonisation with osteoblasts which calcificate even without addition of specific growth factors.
SKU: n/a -
Grinding & Milling, Jet Mills
Jet Mills
A jet mill grinds materials by using a high speed jet of compressed air or inert gas to impact particles into each other. Jet mills can be designed to output particles below a certain size, while continue milling particles above that size, resulting in a narrow size distribution of the resulting product. Particles leaving the mill can be separated from the gas stream by cyclonic separation.
SKU: n/a -
Megatron
Kinematica Megatron MT-FM
Foaming Machine
In recent years, the market for aerated products has significantly increased in the chemical, pharmaceutical and food industry due to the fact that several product properties can be better adjusted by means of a so-called foaming process.
In collaboration with University of Zurich (ETH), Switzerland, KINEMATICA developed a new generation of foaming machines in the MEGATRON® FM model series and introduced them into the market. The outstanding feature of our Foaming Machine is the generation of micro bubbles in the order of magnitude of 5-10 µm and their dense distribution due to our innovative rotor/stator geometry. The extremely effective foaming machine MEGTRON® FM works continuously and is available in configurations suitable for laboratory, pilot plant and production areas of applicable industries. Scale-up starting from formulation using a few liters up to production is easily possible due to our application know how and different rotor/stator geometries.
Our Sales Representatives in consultation with our engineering department are able to recommend and determine the proper configuration for any specific application.
SKU: n/a
