Solid, high-quality pellets are an important precondition for reliable and meaningful XRF analysis. The PP 25 is a compact benchtop unit with particularly simple and safe operation. With a pressure force of 25 t it is ideally suited for the preparation of solid samples for XRF analysis. The pellets produced are of high quality and are characterized by their high degree of stability. The piston pressure can be read off from the clearly visible manometer scale. The dies for the Pellet Press PP 25 are available in several diameters and can be evacuated completely.
cement, minerales, ores, raw materials, slag, …
The pressure plates and die are located in the inner cylinder. The sample is placed between the polished pressure plates. A hydraulic press is then used to apply the necessary pressure to the sample via the die, which projects slightly from the die housing.
| Applications: | preparation of pellets for spectral analyses |
| Field of application: | chemistry / plastics, construction materials, environment / recycling, geology / metallurgy, glass / ceramics |
| Max. pressure: | 25 t, hydraulic press with manual operation |
| Pressure force: | 1 – 25 t (10 – 250 kN) |
| Dies: | ø 32 / ø 40 mm |
| W x H x D: | 380 x 620 x 300 mm |
| Net weight: | 50 kg |
| Standards: | CE |
The vibratory feeder DR 100 is used for the uniform, continuous feeding and conveyance of pourable bulk materials and fine powders. The DR 100 feeds mills, sample dividers, and particle measuring devices, and it is also suitable for other feeding tasks. Its performance, adaptability and compact design makes this device suitable for a great variety of applications. The DR 100 can also be driven and controlled externally via the built-in interface. Vibratory feeders guarantee reproducibly exact results and maximize the efficiency of downstream laboratory and testing devices.
A faultless and comparable analysis is closely linked to an accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Sample splitters ensure the representativeness of a sample and thus the reproducibility of the analysis.
The RT 100 is equipped with a feed hopper with closed outlet. Thus, up to 30 l sample material may be evenly spread over the entire width of the hopper. The outlet is opened manually by moving a lever and the sample is splitted. The slots of the dividing head can be adjusted to a maximum width of 108 mm.
The sample splitters RT are ideal for the on-site reduction of sample material. They are easy to use, easy to clean and do not need an electrical power supply.
faultless and comparable analysis is closely linked to accurate sample handling.
Only a sample representative of the initial material can provide meaningful analysis results. Rotating sample dividers ensure the representativeness of a sample and thus the reproducibility of the analysis.
The rotating sample divider PT 600 is specially designed for representative, dust-free division and volume reduction of large amounts of powdered or granular bulk materials. The selection of different dividing modules determines the dividing ratio and the sample amount.
A faultless and comparable analysis is closely linked to accurate sample handling.
Only a sample representative of the initial material can provide meaningful analysis results. Rotating sample dividers ensure the representativeness of a sample and thus the reproducibility of the analysis.
The rotating sample divider PT 300 is specially designed for representative, dust-free division and volume reduction of large amounts of powdered or granular bulk materials. The selection of different dividing modules determines the dividing ratio and the sample amount.
