Retsch
Showing 1–24 of 41 results
-
Test Sieves
100 / 150 / 305 / 400 / 450 mm Mesh Sieves
The well-proven RETSCH sieves consist of a solid stainless steel sieve frame of high stability for reliable sieving results. Paying close attention to mesh-specific requirements, the sieve fabric is precisely joined into the frame and tautened. RETSCH test sieve provides a clear and accurate labeling with full traceability.
The sieves can be easily combined with all other sieve brands. Each sieve that leaves our company comes with a test report or, at your request, with a special inspection certificate in conformity with national and international standards (PDF). RETSCH calibration certificates confirm a great number of precision measurements, thus ensuring an even higher statistical reliability for your quality control.
SKU: n/a -
Test Sieves
200 / 305 / 400 mm Perforated Plate Sieves
The well-proven RETSCH perforated plate sieves consist of a solid stainless steel sieve frame of high stability for reliable sieving results.
The sieves can be easily combined with all other sieve brands. Each sieve that leaves our company comes with a test report.
SKU: n/a -
Test Sieves
200/203 mm Mesh Sieves
The well-proven RETSCH sieves consist of a solid stainless steel sieve frame of high stability for reliable sieving results. Paying close attention to mesh-specific requirements, the sieve fabric is precisely joined into the frame and tautened. The individual laser engraving of each RETSCH test sieve provides a clear and accurate labeling with full traceability.
The sieves can be easily combined with all other sieve brands. Each sieve that leaves the company comes with a test report or, at your request, with a special inspection certificate in conformity with national and international standards (PDF). RETSCH calibration certificates confirm a great number of precision measurements, thus ensuring an even higher statistical reliability for your quality control.
RETSCH test sieves are available in many sizes and varieties, primarily in the four frame sizes most widely used in laboratory analytics:
- 200 x 50 mm, 200 x 25 mm
- 8“x 2“ (203 x 50 mm), 8“x 1“ (203 x 25 mm)
SKU: n/a -
Sieve Shakers
AS 200 Basic Sieve Shaker
The vibratory sieve shakers of the series AS 200 are used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after short sieving times.
The AS 200 basic sieve shaker is the economical alternative of the series with familiar quality and reliability. It features digital setting and display of performance and time.
SKU: n/a -
Sieve Shakers
AS 200 Control Sieve Shaker
The analytical sieve shakers of the series AS 200 are used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after very short sieving times.
With its all-digital controls, up to 99 sieving programs and calibration certificate the sieve shaker AS 200 control is indispensable for all users who attach importance to precision and operational convenience and need to comply with the guidelines of the ISO 9001.
SKU: n/a -
Sieve Shakers
AS 200 Digit Sieve Shaker
The analytical sieve shakers of the series AS 200 are used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after short sieving times.
The AS 200 digit cA sieve shaker is recommended whenever controlled amplitude, digital display of vibration height and time and interval operation are required.
SKU: n/a -
Sieve Shakers
AS 200 Tap Sieve Shaker
The analytical sieve shaker AS 200 tap is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. Its tapping motion supports the sieve analysis of certain products such as activated carbon, abrasives, metal powder, spices and diamonds, as specified in the corresponding standards.
SKU: n/a -
Sieve Shakers
AS 300 Control Sieve Shaker
The analytical sieve shaker AS 300 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after short sieving times.
The AS 300 control is particularly designed for test sieves with a diameter of 305 mm (12″). Compared to sieves with a diameter of 200 mm, a 2.25 times higher sieving surface is available. Therefore, the average sieving times can be greatly reduced with the AS 300 control. With its all-digital controls and calibration certificate the sieve shaker AS 300 control is indispensable for all users who attach importance to precision and operational convenience and need to comply with the guidelines of the ISO 9001.
SKU: n/a -
Sieve Shakers
AS 400 Control Sieve Shaker
The analytical sieve shaker AS 400 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring.
The AS 400 control is used for the sieving of dry goods with test sieves of a diameter up to 400 mm. In this, the uniform, horizontal circular motion ensures exact separation of fine and coarse-grained products.
With its all-digital controls and calibration certificate the AS 400 control is indispensable for all users who attach importance to precision and operational convenience and need to comply with the guidelines of the ISO 9001.
SKU: n/a -
Sieve Shakers
AS 450 Basic Sieve Shaker
The AS 450 basic, is a budget-priced alternative to the AS 450 control sieve shaker. The new sieve shaker covers a size range from 25 μm to 125 mm and accepts loads of up to 15 kg. Time and amplitude are digitally set, a memory function allows storage of one program. The AS 450 basic is suitable for dry and wet sieving. It is the economic solution for customers who need to sieve larger quantities of dry material with reliable results.
SKU: n/a -
Grinding & Milling, Jaw Crushers
BB 200 Jaw Crusher
The Jaw Crusher BB 200 is used for the rapid, effective crushing and pre-crushing of medium-hard, hard, brittle and tough materials. Its variety of materials offered, including heavy-metal free steel, its efficiency and safety makes it ideal for sample preparation in laboratories and industrial plants.
For small amounts of sample the BB 200 can be used batch-wise; for larger amounts it can be operated continuously. Control of the gap width and zero point adjustment allow for reproducible results. The Belleville spring washer protects the Jaw Crusher from overloads and in conjunction with maintenance- and lubricant-free sliding bearings guarantees a long service life.
SKU: n/a -
Grinding & Milling, Jaw Crushers
BB 300 Jaw Crusher
The Jaw Crusher BB 300 is used for the rapid, effective crushing and pre-crushing of medium-hard, hard, brittle and tough materials. Its variety of materials offered, including heavy-metal free steel and its efficiency and safety makes the BB 300 ideal for sample preparation in laboratories and industrial plants.
For small amounts of sample the Jaw Crusher BB 300 can be used batch-wise; for larger amounts it can be operated continuously. Control of the gap width and zero point adjustment allow for reproducible results. The Belleville spring washer protects the unit from overloads and in conjunction with the central lubrication guarantees a long service life.
SKU: n/a -
Grinding & Milling, Jaw Crushers
BB 400 Jaw Crusher
The Jaw Crusher BB 400 is used for the rapid, effective crushing and pre-crushing of medium-hard, hard, brittle and tough materials. Its variety of materials offered, including heavy-metal free steel, its efficiency and safety makes it ideal for sample preparation in laboratories and industrial plants.
For small amounts of sample the BB 400 is used batch-wise; for larger amounts it can be operated continuously. Control of the gap width and zero point adjustment allow for reproducible results.
Thanks to the modular construction of housing and frame this jaw crusher is suitable for a wide range of applications.
SKU: n/a -
Grinding & Milling, Jaw Crushers
BB 50 Jaw Crusher
The Jaw Crusher BB 50 has been specially designed for sample preparation in the laboratory. It is used for the rapid, effective crushing and pre-crushing of medium-hard, hard, brittle and tough materials.
The space-saving, dust-tight instrument fits on any laboratory bench and is ideally suited to crush small amounts of sample with large feed sizes gently and without loss.
To avoid metallic contamination, the grinding chamber of the jaw crusher is available of ceramic materials. With its digital gap width display and zero point adjustment the jaw crusher BB 50 allows for reproducible results.
SKU: n/a -
Grinding & Milling, Jaw Crushers
BB 500 Jaw Crusher
The Jaw Crusher BB 500 is used for rapid, effective, crushing and pre-crushing of medium-hard, hard, brittle and tough materials. Its variety of materials offered, including heavy-metal free steel, and its efficiency and safety makes the BB 500 ideal for sample preparation in laboratories and industrial plants.
For small amounts of sample the BB 500 is used batch-wise; for larger amounts it can be operated continuously. Control of the gap width and zero-point adjustment allow for reproducible results.
The BB 500 with its steep crushing chamber and powerful drive provides for very effective crushing kinematics.
SKU: n/a -
Grinding & Milling, Jaw Crushers
BB 600 Jaw Crusher
The Jaw Crusher BB 600 is used for rapid, effective, crushing and pre-crushing of medium-hard, hard, brittle and tough materials.
Due to the low installation height (1 m), the BB 600 is ideally suited for continuous operation in automatic installations and sampling stations. Thanks to the compact design of the BB 600 it may replace a jaw crusher in existing installations.
Small sample amounts with large particle sizes can be crushed batch-wise in the Jaw Crusher BB 600.
SKU: n/a -
Cryogenic Milling, Grinding & Milling
CryoMill
The CryoMill is tailored for cryogenic grinding. The grinding jar is continually cooled with liquid nitrogen from the integrated cooling system before and during the grinding process. Thus the sample is embrittled and volatile components are preserved. The liquid nitrogen circulates through the system and is continually replenished from an Autofill system in the exact amount which is required to keep the temperature at -196 °C.
Powerful impact ball milling results in a perfect grinding efficiency. The Autofill system avoids direct contact with LN2 and makes cryogenic grinding very safe. Its versatility (cryogenic, wet and dry grinding at room temperature) makes the CryoMill the ideal grinder for quantities up to 20 ml.You may also be interested in the High Energy Ball Mill Emax, an entirely new type of mill for high energy input. The unique combination of high friction and impact results in extremely fine particles within the shortest amount of time.
SKU: n/a -
Disc Mills, Grinding & Milling
DM 200 Disc Mill
Thanks to its robust design, the Disc Mill DM 200 can be used under rough conditions in laboratories and pilot plants, as well as online for the quality control of raw materials. The powerful DM 200 requires only a few minutes to achieve the desired grind size.
SKU: n/a -
Disc Mills, Grinding & Milling
DM 400 Disc Mill
The DM 400 is the new comfort model for fine grinding of medium-hard, hard and brittle materials down to 0.05 mm. This model is based on the well-proven DM 200 but offers improved safety features due to the automatic locking of the collecting vessel and grinding chamber, as well as particularly convenient operation thanks to the motor-driven grinding gap adjustment with digital gap display. The clearly structured display shows all grinding parameters.
Thanks to its robust design, the Disc Mill DM 400 can be used under rough conditions in laboratories and pilot plants, as well as online for the quality control of raw materials. The powerful DM 400 requires only a few minutes to achieve the desired grind size.
SKU: n/a -
-
Grinding & Milling, Knife Mills
Grindomix GM 300 Knife Mill
The knife mill GRINDOMIX GM 300 is the ideal instrument for grinding and homogenizing foods and feeds. It allows to process sample volumes up to 0.7 liters quickly and reproducibly.
With four sharp, robust blades and a powerful 1000 W motor, it is ideal for homogenizing substances with a high water, oil or fat content as well as for grinding dry, soft and medium-hard products. A wide selection of lids and containers allows for adaptation of the mill to individual application requirements. The GRINDOMIX GM 300 meets and exceeds all special laboratory and analytical requirements and is a professional device superior to any commercial household mixer.
SKU: n/a -
Grinding & Milling, Mixer Mills
MM 200 Mixer Mill
The mixer mill MM 200 is a compact versatile benchtop unit, which has been developed specially for dry grinding of small amounts of sample.
It can mix and homogenize powders in only a few seconds. It is also perfectly suitable for the disruption of biological cells as well as for DNA/RNA extraction.You may also be interested in the High Energy Ball Mill Emax, an entirely new type of mill for high energy input. The unique combination of high friction and impact results in extremely fine particles within the shortest amount of time.
SKU: n/a -
Cell Disruption, Cryogenic Milling, Grinding & Milling, Mixer Mills
MM 400 Mixer Mill
The mixer mill MM 400 is a compact versatile bench-top unit, which has been developed specially for dry, wet and cryogenic grinding of small amounts of sample.
It can mix and homogenize powders and suspensions in only a few seconds. It is also perfectly suitable for the disruption of biological cells as well as for DNA/RNA and protein extraction. With its high performance and great flexibility the mixer mill MM 400 is a unique product in the market.You may also be interested in the High Energy Ball Mill Emax, an entirely new type of mill for high energy input. The unique combination of high friction and impact results in extremely fine particles within the shortest amount of time.
SKU: n/a -
Grinding & Milling, Mixer Mills
MM 500 Mixer Mill
The mixer mill MM 500 is a compact, versatile bench-top unit which has been developed specially for dry, wet and cryogenic grinding of up to 2 x 45 ml sample material within seconds.
With a maximum frequency of 35 Hz, it generates enough energy to produce particles in the nanometer range. The robust high-performance drive makes the mill suitable for long-term grinding processes up to 99 hours. Hence, the MM 500 is the first mixer mill in the market to provide a real alternative to grinding in a planetary ball mill – with more comfortable handling and less warming effects.
SKU: n/a
